40 CFR § 467.45 Aluminum Forming Point Source Category

§ 467.45 Pretreatment standards for existing sources.

Current through Aug 22, 2025 · Read all of Part 467

Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduced pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources. The mass of wastewater pollutants in aluminum forming process wastewater introduced into a POTW shall not exceed the values set forth below:

Subpart D

Core

Pollutant or pollutant propertyPSES
Maximum for any 1 dayMaximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum forged
Chromium0.0220.009
Cyanide0.0150.006
Zinc0.0730.031
TTO0.035
Oil and grease (alternate monitoring parameter)2.61.3

Subpart D

Forging Scrubber Liquor

Pollutant or pollutant propertyPSES
Maximum for any 1 dayMaximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum forged
Chromium0.0420.017
Cyanide0.0280.011
Zinc0.140.058
TTO0.065
Oil and grease (alternate monitoring parameter)4.92.5

Subpart D

Solution Heat Treatment Contact Cooling Water

Pollutant or pollutant propertyPSES
Maximum for any 1 dayMaximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum quenched
Chromium0.8970.37
Cyanide0.5910.25
Zinc2.981.24
TTO1.41
Oil and grease (alternate monitoring parameter)11053

Subpart D

Cleaning or Etching Bath

Pollutant or pollutant propertyPSES
Maximum for any 1 dayMaximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium0.0790.032
Cyanide0.0520.022
Zinc0.260.11
TTO0.123
Oil and grease (alternate monitoring parameter)9.34.7

Subpart D

Cleaning or Etching Rinse

Pollutant or pollutant propertyPSES
Maximum for any 1 dayMaximum for monthly average
mb/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium1.70.7
Cyanide1.20.5
Zinc5.72.4
TTO2.7
Oil and grease (alternate monitoring parameter)200100

Subpart D

Cleaning or Etching Scrubber Liquor

Pollutant or pollutant propertyPSES
Maximum for any 1 dayMaximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium0.8510.35
Cyanide0.5610.23
Zinc2.821.18
TTO1.34
Oil and grease (alternate monitoring parameter)10050

[48 FR 49149, Oct. 24, 1983; 49 FR 11632, 11633, 11635, Mar. 27, 1984, as amended at 53 FR 52369, Dec. 27, 1988]

← § 467.44 New source performance standards.§ 467.46 Pretreatment standards for new sources. →