40 CFR § 443.13 Effluent Limitations Guidelines for Existing Sources and Standards of Performance and Pretreatment Standards for New Sources for the Paving and Roofing Materials (Tars and Asphalt) Point Source Category

§ 443.13 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

Current through Aug 22, 2025 · Read all of Part 443

The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:

Effluent characteristicEffluent limitations
Maximum for any 1 dayAverage of daily values for 30 consecutive days shall not exceed—
Metric units (kg/cu m of runoff)
TSS0.0230.015
Oil and grease0.0150.010
pH( 1)( 1)
English units (lb/1,000 gal of runoff)
TSS0.1880.125
Oil and grease0.1250.083
pH( 1)( 1)

1 Within the range 6.0 to 9.0.

← § 443.12 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.§ 443.14 [Reserved] →