40 CFR § 428.83 Rubber Manufacturing Point Source Category

§ 428.83 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

Current through Aug 22, 2025 · Read all of Part 428

The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:

Effluent characteristicEffluent limitations
Maximum for any 1 dayAverage of daily values for 30 consecutive days shall not exceed—
Metric units (kg/kkg of product)
COD14.76.11
Oil and grease0.400.144
TSS1.040.52
pH( 1)( 1)
English units (lb/1,000 lb of product)
COD14.76.11
Oil and grease0.400.144
TSS1.040.52
pH( 1)( 1)

1 Within the range 6.0 to 9.0.

← § 428.82 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.§ 428.84 [Reserved] →