40 CFR § 418.76 Fertilizer Manufacturing Point Source Category

§ 418.76 Pretreatment standard for new sources.

Current through Aug 22, 2025 · Read all of Part 418

The pretreatment standard under section 307(c) of the Act for a new source within the mixed and blend fertilizer subcategory which is a user of a publicly owned treatment works and a major contributing industry as defined in 40 CFR part 128 (and which would be a new source subject to section 306 of the Act, if it were to discharge pollutants to the navigable waters), shall be the same standard as set forth in 40 CFR part 128, for existing sources, except that, for the purpose of this section, 40 CFR 128.121, 128.122, 128.132 and 128.133 shall not apply. The following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new source subject to the provisions of this subpart:

Pollutant or pollutant propertyPretreatment standard
BOD5No limitations.
TSSDo.
pHDo.
Ammonia (as N)30 mg/l.
Nitrate (as N)Do.
Total phosphorus (as P)35 mg/l.

← § 418.75 Standards of performance for new sources.§ 418.77 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. →