40 CFR § 414.44 Organic Chemicals, Plastics, and Synthetic Fibers

§ 414.44 New source performance standards (NSPS).

Current through Aug 22, 2025 · Read all of Part 414

(a) Any new source that uses end-of-pipe biological treatment and is subject to this subpart must achieve discharges in accordance with § 414.91 of this part, and also must not exceed the quantity (mass) determined by multiplying the process wastewater flow subject to this subpart times the concentrations in the following table.

(b) Any new source that does not use end-of-pipe biological treatment and is subject to this subpart must achieve discharges in accordance with § 414.101 of this part, and also must not exceed the quantity (mass) determined by multiplying the process wastewater flow subject to this subpart times the concentrations in the following table.

Effluent characteristicsNSPS 1
Maximum for any one dayMaximum for monthly average
BOD56424
TSS13040
pH( 2)( 2)

1 All units except pH are milligrams per liter.

2 Within the range of 6.0 to 9.0 at all times.

← § 414.43 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable (BAT).§ 414.45 Pretreatment standards for existing sources (PSES). →